GIA GIA-AT-O-200VA1, Инструкция для владельца и по установке

Страница: 6 / 24

– 6 –
■ Power Supply Requirement
● Wiring work should be done by official qualified electrician, and all works should meet the
electric appliances safety requirements.
● The supplying wires for the water heater must have earth wire, which should be connected
to the reliable outside earth wire. Besides, the outside earth wire must be effective.
● It must provide the power in line with rated parameters for the heat pump water heater.
● According to the national requirements for electric appliances, there should be an electrical
leakage protector for the heat pump.
● The installation should be in line with the national rules of the wiring.
● When connecting to the power supply, there should be a at least 3 mm all-pole disconnect
device away from the all-pole electric shock.
● If the power wiring is broken, it should be replaced by the manufacturer, the maintenance
department or other professionals. During the replacement, the zero wire and the fire wire
should be corresponded with the zero wire terminal (N) and the fire wire terminal (L), make
sure that the connecting is reliable.
● Note: It is not allowed to disconnect or take apart the ground wire of power supply under
any circumstances; it is prevented to use damaged wires and switches. You should replace
it immediately once it is damaged.
■ Safety Instruction
● The heat pump is designed to offer suitable hot water to the users, only applying to the
described usage.
● Do not use or store gasoline or other flammable, explosive gases or liquids near the heat
pump water heater, otherwise it may cause dangers.
● For your personal and other people’s safety, please do not put anything near the wind–outlet
mouth of the heat pump.
● Children are not allowed to play with the heat pump in order to avoid dangers.
● Please turn off the power when maintain in order to avoid accidents.
● Be sure that refrigerant in the refrigeration system has been drained completely before
taking the welding maintenance, because the refrigerant will produce harmful gases if meets
fire and could easily cause fire.
● Install the anti-electric wall manufactured by our company to the water outlet exit if necessary
■ To Change the Installation Site
If you need to change the installation site of heat pump, please contact your dealer or our
local customer service department.