GI.BI.DI GI.BI.DI SC24, Инструкции по установке

Страница: 14 / 20

SC24
DIP 8
Reduces the pause time to 3 seconds after the intervention of the photocells.
Disables the fast closing function
ON
OFF
FAST RECLOSING
DIP 10
Terminal 9 (SAFETY-STOP) works as terminal 13 (SAFETY 8K2).
See Chap.5 .
ON
OFF
TERMINAL 9
FUNCTION
Terminal 9 works as STOP 8K2.
The activation of STOP 8K2 device causes an immediate STOP of the automatic
device.
Description DIP Status Function
Disables the deceleration function. Only 2 magnets are required.
DIP 7
Enables the deceleration during both opening and closing, when the
respective limit switch is intercepted. The deceleration speed is adjusted by trimmer
TR3 SLOW.
This function provides for use of 4 magnets.
See fig. 22 and 23.
ON
DECELERATION
OFF
9 - DIP SWITCH SW1
DIP 6
Enables automatic closing after the pause time adjustable by the trimmer
TR1 PAUSE from 2 to 250 seconds.
Disables automatic closing. ON
OFF
AUTOMATIC
RECLOSING
DIP 5
When the photocell is intercepted, during both opening and closing, the
gate motion is locked until the photocell is freed.
Subsequently there is always an opening phase.
ON
PHOTOCELL IN
OPENING
OFF
Photocell enabled only during closing,when it is intercepted the gate opens.
DIP 4
Enables the TEST of the devices connected to the terminals (9)-(12)-(13): if the
devices are working perfectly, the cycle can start, otherwise some prolonged
flashings will indicate the anomaly.
Ÿ
Terminal (12 - “PHOTO”): power the photocells’ transmitters by the terminal (18) and
the receivers by the terminal (17). At the beginning of the manoeuvre, the current will
be cut to the transmitters for 1 second and then restored to check its right operation.
Ÿ Terminal (13 - “SAFETY”) and (9 if DIP10=ON ): the resistive value 8K2 Ω is checked
Enables ENERGY SAVING: There will be some tension on terminal (18) only during
the manoeuvre. At rest the leds will be off.
ON
Disables the safety devices test.
Disables ENERGY SAVING
OFF
ENERGY SAVING
SAFETY DEVICES TEST
UK
14
DIP 9
-- -- --