GHM Martens TB225, Руководство по эксплуатации

Страница: 32 / 36

GHM Group
– Martens
GHM Messtechnik GmbH | Kiebitzhörn 18 | 22885 Barsbüttel | Germany
Phone +49-40-670 73-0 |
info@ghm-group.de
| www.ghm-group.de
32
11 Returns
The legal regulations for environmental protection and our personnel re-
quire that devices which are sent back which have come into contact with
liquid are handled without risk to people or the environment.
If you send a device back to us for inspection or repair, we must re-
quest that you strictly observe the following requirements:
On the GHM homepage under 'Downloads/forms' a return shipment form can be
downloaded.
The repair can be performed quickly and without call-back questions if:
1. a filled-in form is provided for each device,
2. the device has been cleaned and packaging which prevents damage to the
device is used, and
3. a safety data sheet for the measuring medium is affixed to the outside of the
package, if the device has come into contact with a critical substance.
12 Disposal
Separation by material and recycling of device components and pack-
aging must take place when the device is disposed of. The valid legal
regulations and directives applicable at the time must be observed. The
device may not be disposed of with household waste. If the device should be dis-
posed of, return it to us with the return shipment form filled in under section 11.
We will then arrange for the proper disposal.
13 Imprint
GHM GROUP - Martens
GHM Messtechnik GmbH | Kiebitzhörn 18 | 22885 Barsbüttel
Managing Director:
Dr. Axel Lamprecht
Sitz der Gesellschaft: Tenter Weg 2-8,
42897 Remscheid/ Germany
Wuppertal District Court, Commercial Register Section B 29352
Copyright: GHM Messtechnik GmbH. All rights reserved. Reprints, digital use of
any type, and duplication may only take place with the written authorisation of GHM
Messtechnik GmbH.
Warning