background image

H86.0.04.6C-01 

 Operating Manual Gourmet Thermometer 

Page 12 von 14 

 

 

_____________________________________________________ 

_____________________________________________________________________________ 

 

11 Fault and System Messages 

Error messages for measurement 

 

Description

 

What to do?

 

Keine Anzeige oder 
wirre Zeichen,  
Gerät reagiert nicht auf 
Tastendruck  

Battery empty 

Replace battery (see chapter 10 Replacing 
batteries)
 

 

System error 

Open battery cover, wait briefly, close again (see 
chapter 10 Replacing batteries) 

 

Device defective 

Return to manufacturer for repair 

ERR.1  

Measured value above 
allowable range 

Check: temperature not within sensor range?  
-> measuring value to high! 

 

defective probe 

Return to manufacturer for repair 

ERR.2  

Measured value below 
allowable range 

Check: temperature not within sensor range?  
-> measuring value to low! 

 

defective probe 

Return to manufacturer for repair 

SYS  
ERR  

System error 

Switch off the device and switch on again - when 
the error remains  
return to manufacturer for repair 

BAT  

battery is ultimately 
exhausted 

(See chapter10 Replacing batteries) 

---- 

Could not calculate 
display value 

 

 

• no suitable probe 
connected 

Check: is a suitable Pt1000 probe connected? 

 

• measuring range or 
input range exceeded 

Check: is the value in the permitted range? 

 

• defective probe 

Return to manufacturer for repair 

 

12 Reshipment and disposal 

12.1  Reshipment 

 

All devices returned to the manufacturer have to be free of any residual of measuring media 
and other hazardous substances. 
Measuring residuals at housing or sensor may be a risk for persons or environment 

 
 
 
 

Use an adequate transport package for reshipment, especially for fully functional devices. 
Please make sure that the device is protected in the package by enough packing materials. 
Add the completed reshipment form of the GHM website  

http://www.ghm-messtechnik.de/downloads/ghm-formulare.html

. 

12.2  Disposal 

 

Dispense exhausted batteries at destined gathering places The device must not be disposed in 
the unsorted municipal waste! Send the device directly to us (sufficiently stamped), considering 
the above if it should be disposed. We will dispose the device appropriate and environmentally 
sound.  
Private user can return the device at the municipal collection points for small electrical 
appliances. 

 

 

 

Содержание GREISINGER Gourmet Thermometer















Отзывы: