G 1400 series
Operation and maintenance | 5
B-H87.0.0X.DK2-2.1
9 / 20
5
Operation and maintenance
5.1
Operating and maintenance notices
_
NOTE
The product and conductivity measuring cell must be handled with care and used in
accordance with the technical data. Do not throw or strike.
_
NOTE
If the product is stored at a temperature above 50 °C, or is not used for an extended
period of time, the batteries must be removed. Leaks from the batteries are avoided as
a result.
_
The device is calibrated at the factory with the permanently connected conductivity
measuring cell. The highest system precision can be achieved in this manner. If
desired, a gradient correction can be carried out for the product in order to further
optimise the accuracy in a narrow range. This is only necessary for normal use. See
Adjustment of the measuring input.
5.2
Battery
5.2.1
Battery indicator
_
For additional information, refer to the operating manual!
5.2.2
Changing battery
_
Only use new, high-quality and suitable alkaline batteries!
For additional information, refer to the operating manual!
