GHM GREISINGER G 1110 Скачать руководство пользователя страница 3

 

G 1110 

 

 B-H88.0.01.DK2-1.2 

 

3 / 

20

 

Disposal ................................................................................. 16

 

Error and system messages ................................................. 17

 

Technical data ....................................................................... 18

 

10 

Service ................................................................................... 20

 

10.1 

Manufacturer ................................................................................ 20

 

 

About this documentation 

1.1 

Purpose of the document 

Read this document carefully and familiarise yourself with the operation of the product 
before you use it. 
Keep this document ready to hand and in the immediate vicinity of the product so that 
it is available to the personnel/user for reference at all times in case of doubt. 

The user must have carefully read and understood the operating manual before begin-
ning any work. 

1.2 

Legal notices 

The liability and warranty of the manufacturer for damages and consequential damag-
es are voided with misuse, disregarding this document, disregarding safety notices, 
assignment of inadequately qualified technical personnel and arbitrary modifications of 
the product. 

This document is entrusted to the recipient for personal use only. Any impermissible 
transfer, duplication, translation into other languages or excerpts from this operating 
manual are prohibited. 

The manufacturer assumes no liability for print errors. 

1.3 

Further information 

Software version of the product: 

–  V1.7 or later 

For the exact product name, refer to the type plate on the rear side of the product.

 

 

 

 

NOTE 

For information about the software version, press and hold the ON button to switch on 
for longer than 5 seconds. The series is shown in the main display and the software 
version of the product is shown in the secondary display. 

 

Содержание GREISINGER G 1110





















Отзывы: