GHM Delta OHM HD50CR, Руководство по эксплуатации

Страница: 5 / 54

HD50CR
- 5 -
V1.0
3 INSTALLATION
Make a 196 x 70 mm cut in the wall, at least 46 mm deep, and 4 holes according to
the drilling pattern shown below, then wall mount the instrument by using the 4 holes
on the front panel.
The connections on the upper part of the housing are as follows:
ETHERNET port
Pressure input (+) Pressure input (-)
RS485 port
Analog output 1
Analog output 2
Analog output 3
Power supply
24 Vac (L=Line, N=Neutral)
or 24 Vdc