background image

 

01 - SAFETY NOTICES 

This user manual and maintenance refers to the product: I

roning table “DORIS-A” 

It is possible to receive the latest release from our Technical Commercial Department. 
 

The present user’s and maintenance manual contains important information for the operator’s health 
safeguard and safety. 

 

Read completely this manual with attention and strictly follow the procedures described in it before 
installing the equipment and starting it up. Keep this manual carefully and always at the disposal of the 
product operating personnel. 

 
The manual contains the following graphic symbols that identify clearly important warnings and safety notices:

 

Failing to follow the indications in this manual could forfeit personnel safety! 

 

Any  possible  modifications  effected  on  the  components  of  the  machine  or  its  different  use  without  prior 
written  authorization  by  the  manufacturer,  relieve  the  latter  of  injury  to  persons  and  /  or  damages  to 
things, voiding any warranty bindings, as well. 
 
The manufacturer cannot be held liable for any damage to things or injury to persons caused by improper 
use of the machine in contrast with these instructions. 

02 - GENERAL DESCRIPTION AND INTENDED USE 

This equipment is intended for professional use or home. 
 

Keep the equipment in every state (still packaged, off, running, etc.) away from children. 
 

 

 

Doris-

A is a complete ironing table, which doesn’t require any supporting equipment for its operation, except for an 

external power supply. 
 
The machine features: a broad universal ironing board and a sleeve shape (option), both of which are padded, 
electrically heated and equipped with a vacuum device, a garment tray, a control panel to adjust the board 
temperature and to operate the different working units, a professional steam iron with built-in boiler, a water feeding 
pump and a tank, enabling to iron several hours without having to refill the boiler with new water. 
 
Thanks to its operation controlled by pedals on both sides, this very user-friendly and efficient ironing table is also 
suitable for left-handers. 

03 - EQUIPMENT IDENTIFICATION 

On the side of the machine is placed an identification plate on which there is: 

Model 

Serial number 

year of construction. 

Supply voltage 

 

 

WARNING! 

WARNING! ELECTRICAL PARTS 
UNDER VOLTAGE 

PROHIBITED! 

PROHIBITED TO WALK 
OR USE AS SUPPORT 

WARNING! HOT SURFACE 

KEEP THE EQUIPMENT 
AWAY FROM CHILDREN 

Содержание ADN 044














Отзывы: