12
buttons and set the temperature to one of the 10 levels. Switch off the heater using
the OFF-button on the HCP.
8.2.3 Manufacturers setting
Default operating parameters of the heater when delivered:
Total heating time
60 minutes
LED 6
Pre-heating period
6 minutes
LED 1+2
Power/total operation
30%
LED 1+2+3
8.2.4 Programming
The values of uninterrupted operation, the pre-heating period and the heating
power are programmable.
Use the following combination to enter the programming mode:
1.
Press and hold the OFF-button.
2.
Press and release the ON-button.
3.
Release the OFF-button and enter the
Setting of the total operation period
You can set 10 levels from 10 to 100 minutes. The position of the single and
illuminated LED - from the left to the right - indicates the level. The
manufacturer´s setting is 60 minutes.
Example for level 6 = 60 minutes total operation:
Level 6 = 60 minutes.
