Fixing the door handle and inserting the doors
8
1 Make sure the door handle is
pointing in the right direction and attach it to the door.
Slide the door handle into the handle body until the claws on the
upper and lower parts of the door handle make a clicking sound
and make sure that the door handle is firm.
Before the doors are inserted, the
door handle must be mounted on both
doors – otherwise the doors could
interlock when they are closed.
Metal fitting of the middle
door
There are notch holes in
the door rail
The door handle is included in the door package
Attach the (large) door handle to the front of the door and
the (small) door handle to the back of the door.
There are two ways to release the temporary locking
mechanism.
1 Attach the door handle and release the locking mecha-
nism.
2. Turn the shaft inside the fastening part of the door
handle with pliers or something similar.
2. Attaching the doors
Attach the doors on the right, centre and
left
Attach the doors where a recess for
attaching them is provided above the
door rail.
You can only attach the doors in these
places!
When you attach the other (middle
and left) doors, make sure that the
previously attached doors (right or
middle) overlap.
Left
Right
Centre
Arrangement of the doors
viewed from the top
Door
rollers
Door,
right
thick
thin
Outer side of the door
Door (right and Left)
Door handle recess
Door handle (large)
Interior view
Door (right and Left)
Door handle recess
Door handle
(small)
Make sure that
the door handle
is positioned
correctly!
The small door handle differs left and right
3. Preventing the door from falling out
It is of the utmost importance to do the following:
After inserting the doors, slide them to the right side and loosen the
screw (where the doors were inserted) on the inside of the door lintel.
(See the inside view of the bearing, Figure 1)
Lower the door rail together with the screw and fix it again with the
screw.
(See the inside view of the bearing, Figure 2)
Loosen the screw
Lintel
Lintel
Fig. 1 Interior view of the garden shed
Door rail
Lintel
Bring together the door
rail with the screw pointing
down and fix it again with
the screw.
Door
Inside
Outside
Door rail, top
1. Loosen the screw
3. Tighten the screw.
Fig. 2 Interior view of the garden shed
Door rail
2. Lower the
rail
Attach the door handle
for the left-hand door as
shown in the drawing.
When attaching the door
handle to the right-hand
door, fix it so that the
thick part of the handle
is on the right side, in
the opposite direction to
the left door handle.
