Peakanalyzer Installation Manual Version 2.6
25
2.3.17 End cap of type EL9011
The end cap EL9011 serves as a cap for the E-Bus contacts at the right side of the last terminal
in the Peakanalyzer. If the terminals are distributed in the field, each subsystem has to be
completed by one end cap after the last terminal.
Picture 14: View of end cap
2.3.18 Connection of external sensors via overvoltage protection clamps
A Peakanalyzer can be optionally equipped with overvoltage protection clamps for the
connection of external sensors. These serve as connection clamps for vibration acceleration
sensors, speed sensors or input signals form external sensors. They are internally wired with
the intended measurement terminals (see Picture 5).