36
Peakanalyzer Installation Manual Version 2.6
4
Connection to the Peakanalyzer
When the Peakanalyzer is delivered, the preconfigured interface configuration can be found in
the delivery note. During the order of a Peakanalyzer the desired configuration can also be
specified.
4.1
Change network settings of the PC
The following settings should be made by a network administrator or the configured settings
should be obtained from a network administrator to avoid conflicts in the network.
To establish a connection to the Peakanalyzer the network settings of the PC may be adopted.
The Peakanalyzer must be in the same subnet as the Peakanalyzer or an active route to the
subnet of the Peakanalyzer must be present.
Picture 27: Adjust network settings of the PC
4.2
Add Peakanalyzer
A new Peakanalyzer can be integrated in the system by selecting diagnosis system
→
New
→
Peakanalyzer in the menu or context menu in the hierarchical tree view. The Peakanalyzer will
be added to the current selected hierarchical layer.