Peakanalyzer Installation Manual Version 2.6
13
chapter 4). The communication of the Peakanalyzer Manager with the Peakanalyzer is done
via this connection.
2.3.4 Connection of IEPE vibration acceleration sensors to terminals of type EL3632
The vibration acceleration sensors are directly connected to the terminals with the label 61, 62
to 99. This are in any cases IEPE terminals of the type EL3632 that are suitable for connecting
two vibration acceleration sensors. The supplied vibration acceleration sensors are connected
with the white wire to the clamp labeled with a black + on white ground and with the black wire
to the clamp labeled with a black - on white ground.
Picture 4: Connection of vibration acceleration sensors and speed sensors
Picture 4 shows the direct connection of the shielded connections of the vibration acceleration
sensors to the measurement terminals EL3632. It is shown that the shield is connected to the
clamp labeled with a black S on yellow ground. Alternatively the shield can be connected in
the bulkhead receptacle to the steel box.