Answering Machine system continue...
You can use the Answering System features of your
telephone when you are away from home. To protect
your privacy, most of the features can be used only
after you enter the three-digit
Code.
Remote
operation
1
Using a tone dialing phone, dial your home phone
number.
2
Listen to or bypass the OGM.
3
Enter your REMOTE PIN Code.
Ö
Once you have successfully accessed the VMAIL
sytem of your phone, any new ICM message(s) will
be automatically played back.
Ö
Otherwise,
press keypad “5”
to playback old ICM
message(s). When playing,
press keypad “5” again
to play the current message from the beginning.
For other instructions, see the Remote Intruction
code menu.
Note:
If the memory is FULL, the X 2i system will
answer your call after the selected time of rings and
plays the OGM 2 message, and then hangs up after 10
seconds.
(
To free some memory
, the caller should
enter the security code and then erase some
unwanted message/s before hang up).
To check your
messages
from a remote
location
The following is the Remote Instruction Code Help
Menu:
To bypass the Outgoing Message, press button
“
*
”
To play previous message
“4”
To skip message
, press
“6”
To stop function
, press
“2”
To delete message currently playing
, press
“8”
To play MEMO message
, press
“0”
To switch TAD to ON
, press
“#”
(a single beep tone
will be heard). Press
“#”
again
to
ON/OFF to
OFF
(a double beep tone will be heard).
31
REMOTE PIN
, press
TAD