gfm GF-Primo Dolly, Инструкция по эксплуатации и правила безопасности

Страница: 57 / 92

56
Setting LIMIT´s
11.4.1.1 Setting individually adjustable LIMITs
LIMIT mode allows the columns lift range to be reset. The standard range from 0 bis 705 mm can be
restricted to e.g. 200 to 500 mm.
Proceed as follows:
Position the column at the new lower position of e.g. 200 by using the Rocker Switch.
Tip:
It’s easier to reach the required position when using a low speed.
Upon reaching the position, press and hold the blue LIMIT button.
Use the Rocker Swich to drive to the second position, keeping the blue LIMIT button pressed.
When the second position is reached e.g. 500mm firstly release the Rocker Switch and then
the blue LIMIT button.
The newly set LIMITs will be shown by a change in the Vertical Bar Display.
It is also possible to set the top limit first, then the lower limit.
To cancel the limits press the LIMIT Button.