GF 2650 DryLoc
®
Amperometric Electronics
English
The 2650 Amperometric Electronics provide the polarization voltage and signal
conditioning required by all GF Amperometric Sensors. Sophisticated circuitry
makes system setup and verification easy. The 2650 Amperometric Electronics
processes signals from a chlorine electrode and transmits digital data via a three
wire cable to the 9950-X Chlorine Controller. The DryLoc
®
electrode connector
quickly forms a robust assembly with the sensor. The Smart Sensor Electronics
also accesses stored factory and real time environmental data stored on the
chlorine sensor.
Features:
• Passes data stored in sensor memory, such as factory calibration data,
service time, range and more.
• GF patented DryLoc
®
connector provides quick assembly and a secure
connection.
Gold-plated contacts and an O-ring seal ensure a waterproof and reliable
interconnect to the sensor.
• Separate drive electronics from sensor make for easy sensor replacement
without running new cable.
• DryLoc
®
connectivity allows easy sensor removal for calibration.
* NOTE: The 9950-X Chlorine Controller is not compatible with the standard 9950 controller.
Operating Instructions
Description
*3-9900-1P-1.090*
3-2650.090 Rev 12 02/22
WARNING
Refer to the 3-463X Chlorine manual for
additional important information regarding
safety and installation.
