GEZE TSA 160 NT F, Схема подключения

Страница: 45 / 64

TSA 160 NT
45
Service menu
23.4 Connecting service terminal ST220
The service terminal ST220 is connected to the control component of the DCU5 at connection RS484 (1).
RS485-ASF
KI
KA
SIS
SIO
RS485 KB
PS
TO
E
PE1
PE2
1
2
42
41
43
13
12
10
11
12
10
1
22
3
1
22
1
2
51
52
12
31
32
33
28
9
22
0
1
23.5 Service menu ST220
23.5.1 Parameter setting 2-leaf drives
X
Carry out parameter setting for the active leaf/passive leaf individually without RS485 connection.
à DPS: Parameter “
ef
” to value 1 for “2-leaf active” or value 2 for “2-leaf passive”
à
ST220: “Door parameters”, “Number of leaves” to “2-leaf active” or “2-leaf passive”
à
S1, S2: Set parameter 1 to value 01 for “2-leaf active” or value 02 for “2-leaf passive”
X
Establish an RS485 connection.
X
Press the “
↵
” button.
As the start for the configuration a selection window for parameter setting of the active leaf or passive leaf is
displayed.
Selection of active leaf/passive leaf parameter setting
Start GF or SF?
Active leaf Para*
Passive leaf Para
Selection of the parameter setting GF or SF
Setting of active leaf parameter setting
Setting of passive leaf parameter setting
If the active leaf is selected, an “*” is displayed as the selection symbol. For the passive leaf a “+”.
23.5.2 Main menu
A 4-digit password must be entered before the main menu can be accessed:
à Password entry is only necessary if the menu is password-protected.
Password
0---
*
X
Use and to select the PIN for the password consisting of digits and characters.
X
Apply with .