Slimdrive SL NT/SL NT-FR
7
Pre-installation
5
Pre-installation
The most up-to-date diagram is applicable for performing the pre-installation work. All components must be
identified and installed in accordance with the drive diagram.
5.1 Cutting the running rail and cover to size
X
X
Cut the running rail and cover to the required
length.
5.2 Fitting the brush
X
X
Cut the brush (1) to the required length and
insert into the running rail (2).
5.3 Fitting the side plates
X
X
Screw the sheet-metal part (2) for securing
the cover in the left-hand and right-hand side
panels (3).
X
X
Fit the side panels on the running rail (1).
X
X
Place the stop buffers (4) on the far left and
right of the running rail.
X
X
Tighten the setscrews (5) slightly. The exact po-
sition of the stop buffers (4) is specified during
door leaf installation.
1
2
3
4
5
