Powerdrive product family
3
Introduction
1
Introduction
1.1 Symbols and illustrations
Warning notices
In these instructions, warning notices are used to warn against material damage and injuries.
X
Always read and observe these warning notices.
X
Observe all measures marked with the warning symbol and warning word.
Warning
symbol
Warning word Meaning
DANGER
Danger to persons.
Non-compliance will result in death or serious injuries.
WARNING
Danger to persons.
Non-compliance can result in death or serious injuries.
CAUTION
Danger to persons.
Non-compliance can result in minor injuries.
Further symbols and illustrations
Important information and technical notes are highlighted to explain correct operation.
Symbol
Meaning
means “important note”.
Information to prevent property damage, to understand or optimise the operation sequences.
means “additional Information”
X
Symbol for an action: This means you have to do something.
X
If there are several actions to be taken, keep to the given order.
1.2 Revisions and validity
Version 01: valid for Powerdrive product family from model year 2021
1.3 Product liability
In compliance with the liability of the manufacturer for his products as defined in the German “Product Liability
Act”, compliance with the information contained in this brochure (product information and intended use, misuse,
product performance, product maintenance, obligations to provide information and instructions) must be ensured.
Failure to comply releases the manufacturer from his statutory liability.
1.4 Reference documents
Type
Name
Wiring diagram
Automatic sliding doors DCU1-NT/DCU1-2M-NT
Additional wiring diagrams
Automatic sliding doors DCU1-2M-NT, door controller DCU1-2M-NT for automatic
sliding doors in escape routes, FR variants DUO, LL, RWS
User manual
Automatic sliding door systems
Faults and corrective measures
DCU1-NT/DCU1-2M-NT Drive electronics for automatic sliding doors
Cable plan
Automatic sliding door systems
Safety analysis
Automatic sliding doors
Pre-installation instructions
Powerdrive product family
These documents are subject to change. Use only the most recent version.
