Powerdrive product family
9
Pre-mounting
5.3 Installing stop buffers
X
Slide the stop buffers (1) onto the track from the
left and right.
X
Tighten the Allen screws (2) of the stop buffer
slightly
.
The exact position of the stop buffers (1) is specified
during moving leaf installation.
5.4 Connecting the contact on the toothed belt locking (optional)
X
Remove the screws (2) on the feedback switch
(1) of the tooth belt locking mechanism.
X
Place the alarm contact switch (3) on the
feedback switch (1).
X
Fasten both switches with the longer screw
(2) from the retrofitting set on the tooth belt
locking mechanism.
X
Connect the cable for the tooth belt locking
mechanism.
X
Shorten the switching flag of the alarm contact
switch if necessary.
