GEZE Powerdrive PL, Инструкции по предварительной установке

Страница: 6 / 20

Powerdrive product family
6
About this document
3 About this document
These instructions describe the pre-installation for automatic sliding door drives in the Powerdrive product family.
4 Overview
4.1 Diagrams
Number Type Name
70506-0-001 Drive drawing Powerdrive PL/FR drives
70506-2-0240 Component drawing Cover version 200×90×6500
70506-2-0238 Component drawing Cover version 150×90×6500
70506-2-0218 Component drawing Cover, bespoke 200×105/90
70506-2-0217 Component drawing Cover, bespoke 150×105/90
70499-2-0247 Component drawing Track, perforated
70485-2-0200 Component drawing Track, bespoke PL 2-leaf
70485-2-0251 Component drawing Track, bespoke PL 1-leaf
The diagrams are subject to change without notice. Use only the most recent version.
4.2 Tools and aids
Tool Closer size
Tape measure
Marking pen
Torque spanner
Allen key
2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
Open-ended spanner 8 mm, 10 mm, 13 mm, 15 mm
Screwdriver set Floor guide slit up to 6 mm/cross-slot PH2 and PZ2
Side-cutting pliers
Crimping pliers for cables
Wire stripper
Display programme switch/Service terminal ST220/GEZEconnects
4.3 Torques
The torques are given at the respective installation step.