Powerdrive product family
16
Pre-mounting
5.12 Installing the side plates
X
Screw the side plates (2) to side of the track with 4.8 x 13
countersunk tapping screws (1).
2
1
3
X
Screw the retaining block (4) to the side plates (2)
on the inside with 4.8 x 13 countersunk tapping screws (3).
X
Screw the threaded pins (5) completely into the retaining
blocks (4) from below.
2
5
4
X
Glue the side cover panels (7) to the side plates (2) on the
outside with 4 glue dots (6) each.
X
When gluing, note the following:
à
The glued surfaces must be clean and grease-free.
à
The visible surfaces of the side cover panels must be
on the outside.
à
The top edges of the side plates and the side cover panel
must be flush.
6
7
