T
Technology
Radar movement detector
Frequency
24,150 GHz
Power flux density
< 5 mW/cm
2
Radiated power
< 20 dBm EIRP
Detection range (hand)
±10 … 60 cm (movement towards
sensor, angle 90°), adjustable*
Type of detection
Movement (independent of direction)
Speed of objects for
detection
Min. 5 Hz or ±3 cm/s,
max. 200 Hz or ±1.2 m/s
Power supply **
12–24 V AC ±10 %
12–24 V DC +30 %/–10 %
Mains frequency
50 … 60 Hz
Power consumption
< 1.5 W
Output
Changeover relay (potential-free contact)
à
Max. contact voltage
42 V AC/DC
à
Max. switching current 100 mA
Holding time
0.5 s (in PULSE mode)
Temperature range
–20 °C … +55 °C
Protection rating
IP 65 (if front and seal are installed on
a smooth surface)
Material
PC
Colour
White
Recommended cable
Braided cable up to 16 AWG – 1.5 mm
2
* Adjustment of the detection field < 10 cm is possible, but the detec-
tion capacity of the sensor can then no longer be guaranteed.
** The unit must be supplied by an approved SELV-limited current
source of Class II. This requirement is the need for double insulation
between primary voltages and the unit supply. The power supply
should be limited to 1.5 A.
The GC 307+ can be installed behind tiles,
wood, plaster, plastic and glass.
Do not install the GC 307+ behind metal-
lic surfaces.
Do not install the GC 307+ in the swivel-
ling range of doors.
Avoid moving objects near the GC 307+.
Intended use
The movement detector GC 307+ may only be
used for the activation of automatic sliding, circular
sliding, folding, swing or revolving doors with GEZE
drives.
195727 (Hand Icon)
195751 (WC Icon)
193226 (Hand Icon)
195750 (WC Icon)
GC 307+
198725-00
