106
|G3 – Owner’s Manual
11.5.3
R
OUTING
DAW
If you connect your G3 module to a computer via USB cable,
then you will have the 6 USB-Outs and the sum of the
Master-Outs are available. The table shows the channel
assignment.
DAW Channel
(USB)
1 (Master Out 1)
2 (Master Out 2)
3
4
5
6
7
8
Only the dry signals are sent via the USB channels. Only the Ambient effect is output as well. You can record
the other effects via channels 1&2. Here, the entire sum of the direct outs is reproduced.
Tip
: To record only the effects via channel 1&2, deactivate the input channels for the instruments at the
Direct-Outs in the matrix.
Содержание G3
Страница 14: ......
Страница 16: ...16 G3 Owner s Manual 3 MOUNTING INSTRUCTIONS 3 1 MOUNTING THE MODULE BRACKET ...
Страница 17: ...G3 Owner s Manual 17 3 1 CONNECTING EXTERNAL EQUIPMENT TO THE G3 MODULE 3 1 1 FRONT ...
Страница 18: ...18 G3 Owner s Manual 3 1 1 REAR PANEL Make sure that the unit is switched off before connecting the equipment ...