Package Contents
Housing
included IR pass filter, Splitter, Wall mount bracket with concealed cable
guide, IR-LED illuminator, Camera G-Cam/EBC-2112, Lens depending on customer
selection, Quick installations guide
Data medium:
Operating instructions ANPR DE/EN in PDF, Operating Instructions
G-Cam/EBC-2112 in PDF, IP admin tool for IP camera
Assembly instructions:
Before starting electrical work, make sure that all electrical components are
disconnected from the circuit.
Technical data splitter:
Input: Power supply: PoE+ (802.3 at)
Output: Heater: 5W, Fan: 2W, Camera: PoE 7W
IR-LED illumination: 48 VDC / 13 W
▪
Fix the bracket in the required position (1) Fig.1 by means of screws
of diam. 8 mm with special small blocks.
▪
Unscrew the screws of the left side (2) Fig. 2 and open the housing.
The top cover has a rotation of 180°.
▪
Unscrew the 4-fastening screw of internal slide and remove it by
movement on rear direction (fig.3).
▪
Insert the Ethernet cable through the cable gland M25
▪
Connect the Ethernet cable to the splitter. Fig.3
▪
Close the housing by following the opening opposite procedure and
fasten the 2 screws on the left side of housing.t
▪
Then clamp appropriately the cable-gland.
