Getinge Castle MTP 1800 Series, Руководство по эксплуатации, Страница: 18 / 98

General Description
1–8
MOST COMMON OPTIONS
Strip Chart Printer
A strip chart printer with paper take-up, records all cycle program and in-
process performance data. Each cycle program, including time and
temperature set points, may be printed on demand. In-process cycle data is
automatically printed at the beginning and end of each cycle phase, as well
as at the beginning and end of each cycle phase, to provide a chronological
time/temperature profile of actual cycle performance.
Vertical Powered Door
The door is powered open and closed to permit ease in loading and
unloading the chamber. The system includes door activation switches and
status lights at the door location, which are wired to the automatic control
system.
Double Door
Pass-Through
The unit is provided with an additional door for pass through operation and
is complete with an unload end user control panel.
Electric Heat
Stainless steel, electric immersion heaters are provided in the sump in place
of the steam coil heater to maintain the recirculated treatment solution
temperature. The unit requires a separate electrical connection.
Automatic Agent Injection
System
TIME BASED
A non-monitored, time based, volumetric type injection system is provided
to automatically meter user supplied liquid cleaning agent into the sump.
(Two systems are required if an alkaline and acid treatment solution are to
be used).
MONITORED
A monitored proportional type injection system is provided to automatically
inject user supplied liquid cleaning agent into the sump. The treatment
solution concentration is sensed with a probe, and a proportional amount of
agent is injected to attain and maintain the selected agent concentration.
(Two systems are required if an alkaline and acid treatment solution are to
be used.)
Internal Chamber
Illumination
An exterior vapor proof port and light is provided to illuminate the chamber
interior.