78812021-EN
CardioMem
®
CM 100 XT
25
10 Preparing the recording
You may set the limit values of automatic heart rate detection for
each patient individually, as explained in the
To prepare the recording, in addition, perform the following steps:
Inserting the battery
Instructing the patient
Preparing the skin of the patient
Connecting the electrodes to the recorder
Attaching the device to the patient
Turning on the recorder
Checking the signal quality
10.1 Inserting the battery
Use a ballpoint pen to unlock the battery compartment. Hold the
recorder securely in one hand with the rear to the top and gently
push the tip of the ballpoint pen into the hole (1) until the latch is
released. The battery compartment opens downward (2) and can
be removed now (Fig. 3).
Fig. 3
– Opening the battery compartment
