background image

 

 

COMPACT 50M-230 · TOTEM 50M-230 INSTRUCTION MANUAL 

 

 

7. REPAIR

 

The authorized repair workshops are the only ones which can repair the motor in bad state. The supply kit has to be cleaned and drained before its 
delivery. If a supply kit is used by mistake with fluids not derived from diesel, it has to be thinned as many times as it is necessary and enclosed a note 
indicating the chemical substances, which have been pumped with this unit. The supply kit, which does not contain these specifications, will be admitted 
neither in the workshops nor in the factory. When you order spare parts, make sure that you give the code number of the spare part and the supply kit 
serial number. Only on this way you will receive the adequate spare part. 

 
 

8. WARRANTY 

1. 

All the products manufactured by TOT COMERCIAL SA have a WARRANTY of 12 (twelve) months from their purchase, against any manufacturing 
defect. 

2. 

TOT COMERCIAL SA guarantees, in the warranty period, the change/the devolution of the defective part or product. This material must be sent with 
prepaid freight to our factory or any appointed technical service. After our technical inspection, it will be determined whether the responsibility is from 
the manufacturer, the user, the installer or the delivery transport. 

3. 

The warranty does not cover: Inadequate use, negligence, corrosion, abuse, manipulation or the wrong installation of the products, a use of non-
original spare parts or not concerning to the specific pattern. All the manufactured and/or commercialized equipment must be installed according to the 
given instructions by the manufacturer. 

4. 

The accessories and the products not manufactured by TOT COMERCIAL SA are liable for their original manufacturer’s warranty. 

5. 

Because of the constant innovations and development, TOT COMERCIAL SA keeps the right to modify the specifications of its products and publicity, 
without prior notice. 

 

9. CONFORMITY DECLARATION

 

Manufacturer:

 

TOT COMERCIAL sa Partida Horta d'Amunt s/n Apartado Correos nº 149

 

25600 BALAGUER (Lleida) SPAIN

 

 

DECLARES:

 

Under its own responsibility the supplied product:

 

FUEL SUPPLY KIT 

Trademark:

  

GESPASA

 

Model:

  

COMPACT 50M-230

 

TOTEM 50M-230

 

 

It is in accordance with the following legislative and/or regulative documents: 

 

 

DIRECTIVES 

No. and date 

 

 

2006/42/CE: on machine safety 

EN ISO 12100:2012 
EN 809:1999+A1:2010 

 

 
- This Declaration will lose its validity in case that any modification is made without the explicit manufacturer's consent. 

 

Balaguer (Lleida), November 2017

 

 

Andreu Pané 

 

Содержание Compact 50M-230








Отзывы: