German pool MAC-10, Руководство по эксплуатации

Страница: 9 / 16

P.9
安裝排氣管
‧ 將接合器(參閱P.5「配件」)旋進排氣管，
再將排氣管以順時針方向旋進機身的排氣管
接駁位。(圖2)
‧ 將接合器安裝於窗口密封板上。窗口開口闊
度應與密封板配合(可調校密封板之高度)。
‧ 必須妥為安裝排氣管，避免排氣管出現明
顯彎曲，確保內裡氣流暢通。(圖3)
‧ 將排氣管調校至合適的長度，切勿隨意更換
或加長排氣管，以免發生失誤。
‧ 排氣管最長可展開至1.5米。安裝時將排
氣管縮短，以盡量將它與密封板呈水平狀。
Installation of Exhaust Pipe
‧
Attach pipe connector (see P.5 “Accessories”)
to exhaust pipe. Then, spin the exhaust pipe
into the exhaust connector on the machine
(clockwise). (Fig.2)
‧
Put pipe connector into window sealplate. Adjust
window opening width, so that the sealplate
matches with the window properly (the length of
the sealplate is adjustable).
‧
Avoid acute bends in the exhaust pipe to ensure
free airflow in the exhaust pipe. (Fig.3)
‧
Length of exhaust pipe should accord with
the machine features. To prevent errors, do
not replace or lengthen it randomly.
‧
The maximum length of unfolding the
exhaust pipe is 1.5m. Shorten the length
and keep it as level as possible when installing.
圖3
Fig.3
安裝說明 INSTALLATION INSTRUCTIONS
圖2
Fig.2
排氣管接駁位
Exhaust Connector
排氣管
Exhaust Pipe
接合器
Pipe Connector