P.12
P.13
目錄
注意事項
14
產品結構
15
操作面板
17
操作說明
18
產品問與答
20
保養與清潔
21
技術規格
21
常見故障及處理方法
22
保用條款
23
If you encounter the following common phenomenon, please resolve them according to the following
instructions. If the phenomenon cannot be resolved or a cause cannot be found, please contact our
customer service and repair centre.
Note
For safety, do not repair or dismantle the product yourself.
Troubleshooting
Phenomenon
Solution
Infrared heating element does not heat.
- Insert the power plug correctly into the power socket.
- Ensure there is power in the socket.
- Ensure the power switch is turned on.
- The electrical rating shown on the rating plate
corresponds with the electricity supply.
Portions on the infrared heating element
do not illuminate.
The infrared heating element is a safe and hygienic mode
of cooking. Like fluorescent lamps, the infrared heat
-
ing element has an electrical connector that does not
illuminate.
Emission of smoke and odour at the first
use.
When using the product for the first time, the heating arm
with the built-in infrared heating element may emit some
smoke and odour. This is the ageing phase of the product.
After second or third use, this phenomenon will disappear.
There is discolouration on the heat emit-
ting parts of the stainless steel safety
gauze.
Before the infrared heating element leaves the factory, it
was subjected to heat testing. It is a normal phenomenon
for the stainless steel gauze to experience some discol
-
ouration during this test.
During operation, the appliance suddenly
stops and the power is switched off.
For safety, this appliance is equipped with an overheat
protection. Prolonged operation at high temperature will
cause the power to cut off. After a certain period, the ap-
pliance will return to normal operation.
Damaged power cord
Repair work should be carried out by an authorised profes-
sional.
