Hanging Ironing Flat Ironing
“On / Off” and Changing Mode
Indication light “Flashing” - Preheating
Indication light “On” - Standby Mode
High Volume Steam Operation
Low Volume Steam Operation
Water Tank running out of water
The Steamer not heating
The Steamer not turning on
There is no steam
Troubleshooting
Is it properly
plugged in?
Is it in the
right position?
Is the Water
Tank empty or
running out of
water?
ECO
Problem
Area to Check
The Plug
Indication
Lights
Water Tank
MODEL
VOLTAGE
FREQUENCY
POWER
PRODUCT DIMENSIONS
NET WEIGHT
IRH-112
230V
50Hz
1200W
(H)230 x (W)50 x (D)90 mm
650 g
Please read these instructions and warranty information carefully before use
and keep them handy for future reference.
USER MANUAL
WARNINGS AND RECOMMENDATIONS
1. Please read the instructions carefully before use and keep them handy for
future reference.
2. Before connecting to the Power Supply, check to see if the Rated Voltage of
the appliance matches the local Mains Voltage.
3. The user cannot walk away while the product is still connected to the Power
Supply.
4. Product repair and replacement must be handled by our Maintenance
Department.
5. Avoid touching the Soleplate and other hot area in the unit to prevent burns
and injuries or damages to objects.
6. When an abnormality occurs (such as a burning smell or smokes, etc.), stop
using it immediately and disconnect the Power Supply to avoid fire and
electric shock; then consult our Customer Service.
7. Do not attempt to disassemble the unit or repair it at your own risk. Please
send it to the Maintenance Department.
8. Do not iron on buttons or other hard objects to avoid damaging the surface
coating of the Soleplate.
9. This product is for household use only. Do not use it other than its intended
purposes.
10. When using the steamer ironing flat, must find a sturdy top to work on. A
sturdy top is also required when laying down the steamer.
11. If there is a drop, resulted in visible signs of damage or poor contact, the unit
can no longer be used.
12. Before cleaning the product, inserting or removing the water tank, be sure to
unplug the Power Cord first.
13. Do not let children play with this product.
14. When you leave even for a short time, turn off the product and unplug the
Power Cord.
15. Please check the Power Cord regularly for any damages.
16. Do not allow the Power Cord to come into contact with hot vapors when ironing.
17. Do not fill the Water Tank with perfume, detergent, ironing aid or other chemicals.
18. When ironing clothes of different fabrics, can choose high or low volume
steam accordingly.
PRODUCT STRUCTURE
FUNCTION KEY AND ICONS EXPLAINED
OPERATING INSTRUCTIONS
1. Connect the product to the Power Supply, short press “ ” key, the
indication lights of different icons will be turned on and off one by one
while the unit is conducting a self-test.
2. The indication light “ ” flashes when the product is preheating; when the
indication light “ ” stopped flashing and is turned on, the Steamer is ready to
be used.
3. Short press “ ” key once to adjust to High Volume Steam Operation,
indication light of the “ ” icon is on.
4. Short press “ ” key again to adjust to Low Volume Steam Operation,
indication light of the “ ” icon is on.
5. Press “ ” key again, the indication light “ ” will be on and the steam
vapor will be off.
6. Press and hold “ ” key for 2 seconds, the indication light goes off and
Steamer is turned off.
NOTE:
When the Water Tank is running out of water, the pump will make a whistling
sound, and the “ ” icon will flash, indicating that the Water Tank is running
out of water; fill the Water Tank with water and then short press the “ ” key
to resume normal operation.
TWO WAYS OF IRONING
WARNING
Do not aim at people when using the Steamer to avoid burns by high
temperature steam.
CLEANING & MAINTENANCE
After unplugging the Power Cord, wait for the product to cool down first.
1. Wipe the Soleplate and other parts with a soft cloth.
2. When there are heavier stains, do not rinse with water. Wipe with a soft
cloth dampened with a mild detergent.
3. If there are white scales (mineral deposit) in the Water Tank, pour a small
amount of vinegar into the Water Tank and wait for a few minutes, then
wash the Water Tank thoroughly and rinse it a few times with clean water.
TROUBLESHOOTING
For some common problems, please refer to below table for troubleshooting.
If the problem persists, please contact our Customer Service.
TECHNICAL SPECIFICATIONS
H A N D H E L D G A R M E N T S T E A M E R
I R H - 1 1 2
ECO
Storage Bag
Brush
Soleplate
Handheld
Garment Steamer
