German pool GP13 Series, Руководство пользователя

Страница: 10 / 24

P.10
OPERATION INSTRUCTIONS
WARNING!
All cooking ranges must be installed, tuned and connected by registered gas installers. DO NOT install
or repair the cooking range yourself.
DO NOT use additional fitting, such as aluminium foil.
DO NOT clean the top of the sensor with a hard brush or sharp object, as they may damage the sensor.
1. While pushing the control knob, turn it to the left (towards the “ ” position) slowly until you
hear a ‘clicking’ sound. Electronic spark will ignite burners. Release your hand after confirming
the burners are ignited. The hob has automatic continuous ignition function, DO NOT continue
pushing the control knob after ignition. ‘Click’ sound and spark will stop automatically after 6-8
seconds.
2. If the flame goes out when you release your hand, repeat the ignition procedure again but try
releasing your hand slowly.
3. Turn Control Knob to adjust flame to desirable setting.
4. Turn the Control Knob slowly to adjust the flame intensity between “
●
” and “ ”. (Fig.4).
5. If the flame extinguishes during use, the safety device will automatically shut off the gas supply.
When this happens, turn the Ignition Control Knob knob to “
●
” position.
6. Turning the knob backwards to the “
●
” position will extinguish the burner.(Fig.5)
(Fig.4) (Fig.5)
Extinguish Ignition
Flame Failure Safety Device
• If the flame extinguishes during use, the automatic flame failure safety device will shut off gas
supply to the cooking range. When this happens, turn the knob to “
●
” position.
• The safety sensor is very delicate –DO NOT use hard brushes or rough cleaning pads when
cleaning it.
• Aeration is preset at factory. DO NOT attempt to adjust it.