German pool EF-716F, Руководство по эксплуатации

Страница: 7 / 20

Assembly Instructions
P.7
Note
Align the grille openings with the three molded pegs on the Motor Housing (8).
Note
Make sure the edge of the Motor Shaft aligns with the hole of the Fan Blades.
Caution
- Both the Front and Rear Grille (1 & 7) must be securely attached to each other before operating the product.
- Do not put your hand under fan head to avoid being clipped.
Unit Base
1. Put the Base Pipe (18) on the Unit Base (19). Then place the Metal Plate (20) under the Unit Base (19) and
securely connect them with the L-Screw (21).
2. Attach the Motor:
- Insert the Fan Arm (14) onto the Extension Tube (16).
- Tighten the Tube Lock (15) until the Fan Arm is in place.
- Ensure the Fan Arm is firmly attached to the Extension Tube end.
- Use an adjustable pad (not provided) if ground is not on a flat or level surface.
Fan Blades & Grille
1. Unscrew the Grille Connector (6) from the front of Motor Housing (8).
2. Place the Rear Grille (7) onto the Motor Shaft (11).
3. Place the Grille Connector (6) onto the Motor Shaft (11) and securely tighten it.
4. Attach the Fan Blades (3) onto the Motor Shaft (11) and fix it with the Blade Cap (2).
5. Connect the Grilles:
- Place the Grille Ring (4) on the Rear Grille (7) and fix the Front Grille (1) to it.
- Connect both Grilles (1 & 7) with the Screw (5).