Gerber DCS 1500, Руководство по началу работы

Страница: 57 / 176

Page 49
E
ngl
is
h
Appendix
DCS 2500 Options
To order hardware or software options, call 1.800.321.2448.
Option Description
InfoJet Inkjet
Printer
Inkjet print head mounted to the cutting beam to
annotate on material or overlay plastic/paper.
InfoMark Labeler
Adhesive-backed label head mounted to separate
beam.
Bar Code Reader
Used to quickly open cut files if bar codes are used
on paper work orders.
Cutting Surface
Options
Various cutting surfaces available for different
applications.
Pneumatic
vacuum shut- off
blast gate
Used to shut off vacuum to entire or half of table if
vacuum zones are configured.
Reverse Air
Blower used to “float” non-porous materials on the
cutting table to assist with material placement.
Large (1.75”)
wheel blade
Used to cut high loft materials such as foam-
backed fabrics and carpeting.
High Torque
Theta Motor
A heavy duty theta motor used when excessive
drills (punches) are required.
Video Projector
for manual
nesting
An overhead mounted video projector used to
display parts on material. Parts can be manually
nested with a trackball pointing device.
Figure 29: Hardware and software options