Instructions for Use
Bodystik
Serial no.: xx|8|301|yyy and 2301xxxxx
Page 82
Version: 7 | Release date: 02. August 2021
8.2.2
Checking / Replacing O-Rings and Sealing Rubbers
During the daily inspection of the O-Rings and sealing rubbers,
attention must be paid to mechanical damage or signs of
abrasion. If necessary, any affected parts must be replaced.
Once a year it must generally be replaced. Proceed as described
below:
O-Rings Shutter Block
[1a] Insert with a slight rotation
[1b] Press firmly
Identical steps [1a und 1b], see below.
O-Rings Shutter Head
[1a]
Insert with a slight rotation
[1b]
Press firmly
[2a]
Insert one side into the groove
[2b]
Slightly screw in
[2c]
Press the second side into the
groove
[2d]
Press all around
To remove the rings, proceed in
reverse order.
Attention
The unit may be damaged.
Therefore: Do not use any
pointed / sharp objects for
removal!
2
1
1a
1b
