Instructions for Use
Bodystik
Serial no.: xx|8|301|yyy and 2301xxxxx
Page 100
Version: 7 | Release date: 02. August 2021
12.4
Electromagnetic Compatibility / EMC Guidelines
The manufacturer tests his products for emitted interference and
interference resistance. Compliance with the relevant standards
and directives is certified in the Declaration of Conformity that
accompanies this device. The results of the EMC test can be
found in the following chapter.
12.4.1
Emitted Interference Guideline and Manufacturer Declaration
Guidelines and manufacturer’s declaration – electromagnetic emissions
The Bodystik is determined for operation in an electromagnetic environment as specified below.
The user / operator of the Bodystik should ensure that it is operated in this environment.
Measurement of
electromagnetic emissions
Compliance
Electromagnetic environment – Guideline
RF emissions CISPR 11
Group 1
The Bodystik uses RF energy exclusively for its
internal function. Therefore, its RF emission is very
low and is improbable to interfere with adjacent
electronic equipment.
RF emissions CISPR 11
Class B
The Bodystik is suitable for use in all
establishments, including living areas and those
directly connected to the public supply network,
which also supplies buildings used for residential
purposes.
Emissions of harmonic
oscillations according to
IEC 61000-3-2
Class A
Emissions of voltage
fluctuations / flicker
according to
IEC 61000-3-3
Compliance
