Instructions for Use
Spirostik Blue
Serial no.: 2111xxxxx
Version: 7 | Release date: 02. August 2021
Page 71
When selecting a suitable disinfectant, please observe:
•
Chap. 2.2.2 “Consumable Items / Auxiliary Materials”
For selection of suitable disinfectants for surface / wipe
disinfection also note
•
The separate IFU Cleaning and Disinfection
Information on the application and dosing of the disinfectant
can be found in the separate manual of the respective
manufacturer. The safety instructions contained must be
observed.
9.2.1
Spirostik Blue
All parts of the Spirostik Blue can be cleaned of dirt with a soft
cloth using a cleaning solution / weak soapy water.
All parts of Spirostik Blue which come into contact, or could
come into contact, with the patient must be treated with a
surface disinfection. Otherwise, these can be wiped with a soft
cloth using a weak soap solution.
9.2.2
Reusable Flow Sensor and Mouthpiece
To avoid cross contamination, reusable flow sensors and
mouthpieces must absolutely be disinfected after each use.
To do this, proceed as follows:
