Instructions for Use
Safestik
Serial no.:
2011xxxxx
Page 48
Version: 4 | Release date: 14. July 2021
12.4
Electromagnetic Compatibility / EMC Guidelines
The manufacturer tests his products for emitted interference and
interference resistance. Compliance with the relevant standards
and directives is certified in the Declaration of Conformity that
accompanies this device. The results of the EMC test can be
found in the following chapter.
12.4.1
Emitted Interference Guideline and Manufacturer Declaration
Guidelines and manufacturer’s declaration – electromagnetic emissions
The Safestik is determined for operation in an electromagnetic environment as specified below.
The user/operator of the Safestik should ensure that it is operated in this environment.
Measurement of
electromagnetic emissions
Compliance
Electromagnetic environment – Guideline
RF emissions CISPR 11
Group 1
The Safestik uses RF energy exclusively for its
internal function. Therefore, its RF emission is very
low and is improbable to interfere with adjacent
electronic equipment.
RF emissions CISPR 11
Class B
The Safestik is suitable for use in all
establishments, including living areas and those
directly connected to the public supply network,
which also supplies buildings used for residential
purposes.
Emissions of harmonic
oscillations according to
IEC 61000-3-2
Not applicable
Emissions of voltage
fluctuations / flicker
according to
IEC 61000-3-3
Not applicable
