57
5.5.10 Email
If you need to trigger Email when an alarm happens or IP address is changed, please set the
Email here first.
Go to Config
→
Network
→
Email.
Sender Address
: sender’s e-mail address.
User name and password
: sender’s user name and password (you don’t have to enter the
username and password if “Anonymous Login” is enabled).
Server Address
: The SMTP IP address or host name.
Select the secure connection type at the
“Secure Connection” pull-down list according to
what’s required.
SMTP Port
: The SMTP port.
Send Interval(S)
: The time interval of sending email. For example, if it is set to 60 seconds
and multiple motion detection alarms are triggered within 60 seconds, they will be considered
as only one alarm event and only one email will be sent. If one motion alarm event is triggered
and then another motion detection alarm event is triggered after 60 seconds, two emails will
be sent. When different alarms are triggered at the same time, multiple emails will be sent
separately.
Click the “Test” button to test the connection of the account.
Recipient Address
: receiver’s e-mail address.