
16
2.5 Installing HardDrives
2.5.1 Installing 3.5” Disk in a Disk Tray
1.
Make sure the lock indicator is in unlocked position. To pull out a disk tray, press the tray
open button.
Tray
Open
Button
2.
Pull out an empty disk tray. Pull the lever handle outwards to remove the carrier from the
enclosure.
3.
Place the hard drive in the disk tray.
4.
Install the mounting screws on the bottom part to secure the drive in the disk tray.
Tray Hole A
5.
Slide the tray into a slot.
6.
Close the lever handle until you hear the latch click into place.