7
2.3 Disconnecting Built-in IR Lights and Connecting to
External IR Lights
Follow the steps below to connect to any user-supplied external IR lights in place of the
camera’s built-in IR lights:
1. First, turn off the camera.
2. Disconnect
Built-in IR Light Wiring
(see No. 1,
2.1 Internal Wiring
).
3. Then connect it to
External IR Wiring Pin
(see No. 2,
2.1 Internal Wiring
), as illustrated
below.
4. Connect the user-supplied external IR lights to
DO2 [External IR Light Wiring]
(see No. 18
—
Brown wire,
2.3 External Wiring
) of the camera.