Administration Mode
30
5
5.1.4 Relay Settings
You can set up an output device to be triggered as soon as registered faces are recognized.
Note:
Make sure an output device is connected to the GV-FR Panel.
◼
Output:
Force triggers the output connected.
◼
Pin Number:
The GV-FR Panel only supports one output pin and device.
◼
Name:
Type a desired named for the output device.
◼
Mode:
Select an output trigger mode from one of the following:
•
General:
Select to trigger the output only once.
•
Toggle:
Select to always trigger the output.
•
Pulse:
Select to trigger the output for the amount of time specified under
Pulse
Time (s)
.
◼
State:
Defines its non-triggered state as normally open or normally closed.
To trigger the configured output device upon face / card recognition events, select
Notify
Settings
>
Event Trigger
>
New Trigger
and select
Relay Output
under Trigger Output.
See
5.3.2 Event Trigger
.
