Mobile Cards and Mobile App
24
2
4. The mobile card has been added to the mobile app now. Double-click it to generate a
dynamic QR code and use the QR code to gain access to its corresponding door.
Once the mobile card is activated on a smartphone, the status of the mobile card on GV-
ASManager will change from “Non-activated” to “Activated”.
Note:
If the status of the mobile card does not change on the Card List accordingly, click the
Mobile Card
button >
Sync Status
.
2.3.2 Scan a QR Code on GV-ASManager
1. On the Card List, select the desired mobile card, click the
Mobile Card
button >
Show
Activate QR Code
.
2. Open GV-Mobile Access app, click
+
on the right top >
QR Code Scan
.
3. Point the mobile camera towards the QG code generated on GV-ASManager.
4. Once succeeded, a prompt for entering a verification code appears. If you have set up an
employee ID for the User (see Step 3,
2.2 Assign Mobile Cards to Users
), enter the ID at
this step. If not, click
OK
to skip the step.