102
8.2.1 Checking the Dynamic IP Address
Follow the steps below to look up the IP address and access the Web
interface.
Note:
1.
The computer you use to configure the IP address must be under
the same LAN with your camera.
2.
The default Administrator and Guest accounts are no longer
supported by
GV-IPCam H.265 series firmware V1.14 or later
.
When logging in for the first time, you need to set up a login
username and password for the camera. See
Creating GV-IP
Camera’s Login Credentials
at the beginning of the quick start
guide.
1.
Install GV-IP Device Utility from the company
website
2.
On the GV-IP Utility window, click the
button to search for the IP
devices. Click the
Name
or
Mac Address
column to sort.
3.
Find the camera with its Mac Address, click on its IP address and
select
Web Page
.
Figure 8-1