GeoVision DVRV853, Быстрый старт, Страница: 67 / 111

Video Capture Cards
59
1
Connecting Hardware Watchdog
To reboot the computer by the hardware watchdog on the GV-Video Capture Card, a
connection needs to be made from the card to the motherboard.
1. Using the supplied jumper wire, connect the reset jumper pins on the card and on the
motherboard.
Figure 1-32
2. If the computer has a reset switch, the switch’s jumper wire should already be connected
to the motherboard’s reset jumper pins. Remove the switch wire from the motherboard and
connect it to the reset jumper pins on the card.