background image

TEMPHION INSTRUCTIONS

Seametrics • 253.872.0284 

Page 27 seametrics.com

LIMITED WARRANTY/DISCLAIMER - Seametrics TempHion 

SMART SENSOR

A.   Seller warrants that products manufactured by Seller when properly installed, shall be free from defects in material 

and workmanship.   Seller’s obligation under this warranty shall be limited to replacing or repairing the part or parts or, 

at Seller’s option, the products which prove defective in material or workmanship within TWO (2) years from the date 

of delivery, provided that Buyer gives Seller prompt notice of any defect or failure and satisfactory proof thereof.   Any 

defective part or parts must be returned to Seller’s factory or to an authorized service center for inspection.   Buyer 

will prepay all freight charges to return any products to Seller’s factory, or any other repair facility designated by Seller.   

Seller will deliver replacements for defective products to Buyer (ground freight prepaid) to the destination provided in 

the original order.   Products returned to Seller for which Seller provides replacement under this warranty shall become 

the property of Seller.
This limited warranty does not apply to lack of performance caused by abrasive materials, corrosion due to aggressive 

fluids, mishandling or misapplication.   Seller’s obligations under this warranty shall not apply to any product which (a) 

is normally consumed in operation, or (b) has a normal life inherently shorter than the warranty period stated herein.
In the event that equipment is altered or repaired by the Buyer without prior written approval by the Seller, all warranties 

are void.   Equipment and accessories not manufactured by the Seller are warranted only to the extent of and by the 

original manufacturer’s warranty.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESSED, 

IMPLIED OR STATUTORY.   IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY SHALL NOT APPLY.   SELLER’S 

WARRANTY OBLIGATIONS AND BUYER’S REMEDIES THEREUNDER (EXCEPT AS TO TITLE) ARE SOLELY AND EXCLUSIVELY 

AS STATED HEREIN.   IN NO CASE WILL SELLER BE LIABLE FOR CONSEQUENTIAL DAMAGES, LABOR PERFORMED IN 

CONNECTION WITH REMOVAL AND REPLACEMENT OF THE SENSOR SYSTEM, LOSS OF PRODUCTION OR ANY OTHER 

LOSS INCURRED BECAUSE OF INTERRUPTION OF SERVICE.   A NEW WARRANTY PERIOD SHALL NOT BE ESTABLISHED 

FOR REPAIRED OR REPLACED MATERIAL, PRODUCTS OR SUPPLIES.   SUCH ITEMS SHALL REMAIN UNDER WARRANTY 

ONLY FOR THE REMAINDER OF THE WARRANTY PERIOD ON THE ORIGINAL MATERIALS, PRODUCTS OR SUPPLIES.
B.   With respect to products purchased by consumers in the United States for personal use, the implied warranties 

including but not limited to the warranties of merchantability and fitness for a particular purpose, are limited to twenty 

four (24) months from the date of delivery.
Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to 

you.   Similarly, some states do not allow the exclusion or limitation of consequential damages, so the above limitation 

or exclusion may not apply to you.   This limited warranty gives you specific legal rights; however, you may also have 

other rights which may vary from state to state.

WARRANTY/DISCLAIMER

Содержание TempHion ISE





























Отзывы: