Quick start for GeoS-5 RTK UHF EVK
www.geostar-navi.com
1. Download and install GeoSDemo5
®
(and documentation) from
2. Connect UHF antenna to EVK unit (
D
).
3. Connect GNSS antenna to EVK unit (
G
) and place the antenna under clear sky view.
Please find below the recommendations for GNSS antenna placement.
4. Connect EVK’s USB port (
B
) to a PC (the USB driver will be installed automatically
with GeoSDemo5® software).
5. Switch the EVK unit on (
A
).
6. Run GeoSDemo5® on PC, select COM ports manually or using autodetect function.
7. LEDs (
C
) will indicate GNSS operation and UHF communication status.
8. Setup GNSS module for Base or Rover configuration according to marking on EVK
unit.
Quick Start GeoS-5 RTK UHF EVK
Overview
Setup
A B C
D
E
F
G
A. Power On/Off switch
B. USB port
C. LED Indicators
D. UHF antenna connector
E. Reset button
F. Test & Production interfaice
G. GNSS antenna connector
1
