32
Tutorial 2: Working with Data
Using the Viewer Tool Bars
The following
Tool Bars
can be displayed in the
Oasis montaj
Viewer
. Note that the
Database Tools Bar
can be found on page 22.
To
Show|Hide
tool bars, on the
Tools
tab of the
Project Explorer
select the tool bar of
interest, right-click and select
Show|Hide
from the popup menu.
STANDARD BAR
Open Database
Use this command to open a previously defined Oasis montaj database.
Open Map
Use this command to open an existing Geosoft map.
Run GX
Use this command to run a GX from the GX directory.
Load Menu
Use this command to load a menu to the menu bar.
MAP LAYOUT BAR
Zoom Box (Default Shortcut: B-Key)
Click this button to activate the zoom box. Click on the map, then while
holding down the left mouse button, move your cursor in the area of the
map you want to zoom, click the left mouse button to select the area. Click
the mouse button again to zoom to the area selected.
Note:
Once the box has been defined, the cursor and the box are linked
and by moving the cursor around the map you can move the box to
another location, and then click the left mouse button to zoom to
the boxed area.
You can also access this command by clicking the right mouse button on a
map and selecting
Zoom Box
from the popup menu.
Pan (Default Shortcut: P-Key or Spacebar)
Click this button to move around in the currently selected map. Click the
left mouse button and while holding the button down, move the hand cursor
to pan around the current map area.
You can also access this command by clicking the right mouse button on a
map and selecting
Pan
from the popup menu.
