Georator T3UPS-13-20K, Инструкция по эксплуатации

Страница: 49 / 98

5-1
5.
LCD DISPLAY
The LCD can display much more information than can the LEDs. In order to make
the display sharp and readable, the LCD is back-lighted by LEDs. But to further
prolong the life of the LEDs, the CPU will cut off power to the LEDs 3 minutes
after the last keystroke of UP, DOWN or ENTER is pressed. The backlighting will
resume if the UP, DOWN or ENTER key is subsequently pressed. Page displays of
the LCD are described below. This screen will refresh once the system power is
enabled (i.e. the default screen).
5.1. Menu 0 – Main Menu
W E L C O M E T O T H E U P S
M O D E L : 5 0 3 3 A S
／
N : 1 2 3 4 5 6 7 8 9 0 I D : 0 1
5 0 K V A I : 2 7 7
／
4 8 0 V
／
6 0 H Z O : 2 7 7
／
4 8 0 V
／
6 0 H Z
2 0 0 2
／
0 2
／
0 1 T U E 0 8 : 0 0 A M
The first row will display the greeting text set by the factory. Changing the text of
this row is not recommended. The model number (MODEL), serial number (S/N),
and the identification number (ID) are displayed in the second row. While the third
row will display the KVA rating, input rating and output rating of the UPS.
Changing the model number of the second row will also change the rating displayed
in the second row (rating is automatically generated by CPU inside the UPS
according to the MODEL number).
WARNING: Never change the model number yourself, because some
parameters will be changed along with the model number.