S53-053 Panther
25 of 53
13
CPT/pulling
Manual operation
NEVER put your hand or fingers inside the bridge in reach of the clamp in order
to prevent serious injuries.
In case anything goes wrong during manual operation:
Release the joystick
Process is halted immediately
53 DS
2, 3
Use the joystick to continue
levelling.
Joystick down: CPT push
frame down;
Joystick up: CPT push frame
up
53 DS
2, 3
13.1.1
CPT
Before starting the ‘CPT’ operation, check the following:
Step Condition
Information
Remark(s)
Fig.
Switch/item
1.
System is active
Refer to chapter 8 -
-
2.
The engine is running
Refer to chapter 9 -
-
3.
The crawler is levelled
Refer to chapter
11
-
-
4.
The reversing pieces are turned to PUSH
Then operate as follows:
Step Action
Information
Remark(s)
Fig.
Switch/item
5.
Mount a new CPT tube
-
-
6.
Raise the push frame
Use lever (pos. 2)
for a faster
upward
movement of the
Push frame
53 DS
2 or 3
7.
Open the catching clamp
53 DS
4
8.
Move the push frame down and
perform one CPT stroke
53 DS
3
Optionally adjust the CPT speed with
the flow control valve
Optionally adjust the maximum push
force
53 DS
53 DS
6
5
9.
Close the catching clamp
53 DS
4
10.
Continue from step 5
-
-
